http://danthefixitman.org/2014-chevy-tahoe-lt-4x4-replacing-front-brake-pads-rotors-with-video-diy/
Please click the above link for info on the products used in the video.
https://amzn.to/2tgp7qN - Power Stop K2069 Front Brake Kit with Drilled/Slotted Brake Rotors and Z23 Evolution Ceramic Brake Pads
https://amzn.to/37mUU83 - PowerStop Z36 Truck & Tow Front Brake Kit
https://amzn.to/2QEybOi - Bosch Quiet Cast Front Pads Only
https://amzn.to/39nbzdH - EP Auto Torque Wrench
https://amzn.to/3590iuO - Torx Bit Set
https://amzn.to/2u3JBTT - Sil-Glyde Brake Lubricant
https://amzn.to/2LKBQIB- Caliper Compression Tool
https://amzn.to/39qeRwt - CRC Brakleen
Just a quick video showing how to replace the front brake pads and Rotors on a 2014 Chevrolet Tahoe LT 4wd. The pads were worn down, and the passenger side had completely worn down to the metal backing plate so I replaced the rotors on both sides as well.
I didn't change the brake hardware (pad retaining clips) because this brake pad kit didn't come with new ones. I also didn't show cleaning the Caliper Slide pins, but they should be removed and cleaned and re-greased as well.
You will need:
Large Screwdriver/pry bar or a large C - Clamp, or the Brake Caliper Compression Tool mentioned in the video
19mm socket and/or wrench
18mm socket and/or wrench
T-30 Torx bit
Large Breaker Bar
Sil Glyde brake grease
Yellow Loctite
Torque the Main Caliper bracket bolts to the spindle to 129 ft. lbs
Torque the caliper installation bolts (that go into the slide pins) to 80 ft. lbs.
Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
www.danthefixitman.org
www.amazon.com/shop/danthefixitman
Music used by permission:
Produced & Arranged by: Sam Newbold
Tortuga Sam
Track: Miva
https://soundcloud.com/samnewbold/miva
As an Amazon Associate I earn from qualifying purchases.